Transpoxy Masterbond BT (TO 4.68)
| Gloss / Appearance: |
Semi-gloss |
|---|---|
| Colour: |
Grey , Redbrown , Aluminium , selected other colours |
| Volume solids: |
78% |
Transpoxy Masterbond BT is a high solids primer/coating with excellent anticorrosive properties under severe corrosive conditions.
The product has an increased tolerance to damp substrates and can be used at temperatures down to 0°C. Transpoxy Masterbond BT offers good adhesion to blast cleaned steel, weathered (shop) primers as well as a variety of aged coatings. In maintenance conditions it tolerates a lower degree of surface preparation and can be used in combination with mechanical power tooling or high pressure water jetting as surface preparation. Due to its phenolic functional epoxy-amine crosslinking, the products offers good chemical resistance against various fuels and hydrocarbons.
The product carries various (system) approvals from oil companies and is an approved coating according to IMO-PSPC for usage in Crude Oil – and Ballast tanks.
Important documents
Guidance to paint application
Information
Prevent problems at the start by reading through our application guidance.
Transocean Masterbond BT (TO 4.68) English
Product datasheet
Product Datasheet (English)
Guidance to Product Data Sheets
Information
Introduction to reading & interpreting product information in Transocean Coatings product datasheets
Paint coverage calculations / spreading rate
Calculation & Tools
About spreading rate, the effects of thinning, helping to understand paint consumption calculations
