Transocean PU Thinner 6.04

Transocean PU Thinner 6.04

Transocean PU Thinner 6.04 is a thinner and diluent intended for paint-related use. The product is identified under Article Number 604 and is supplied by supplied by Bahati Tech Coating Factories Co. Ltd., Sharjah, UAE.

The product is supplied in fluid form with a characteristic odour, while its colour is according to the relevant product specification.

What is Transocean PU Thinner 6.04?

Transocean PU Thinner 6.04 is formulated for use as a thinner / diluent for paint-related applications.

According to the Safety Data Sheet, the product is a fluid material containing solvents and must be handled with appropriate safety precautions.

Technical Specifications

Physical and Chemical Properties

Transocean PU Thinner 6.04 has a boiling point of 124°C and a flash point of 27°C.

Its ignition temperature is listed as 315°C, while the product is described as not self-igniting under the conditions stated in the Safety Data Sheet.

At 20°C, the product has a density of 0.89272 g/cm³.

The reported VOC (EC) content is 892.7 g/L.

Handling and Storage

Transocean PU Thinner 6.04 should be handled in areas with adequate ventilation or suitable exhaust systems.

During handling:

• Ensure good ventilation at the workplace
• Avoid formation of aerosols
• Keep away from ignition sources
• Do not smoke near the product
• Protect against electrostatic charges

For storage, containers should be kept tightly sealed.

Safety Information

Transocean PU Thinner 6.04 is classified as a flammable liquid and vapour.

According to the Safety Data Sheet, the product:

• May be harmful in contact with skin
• May be harmful if inhaled
• Causes skin irritation
• May cause drowsiness or dizziness

The product carries the GHS flame and exclamation-mark hazard pictograms and uses the signal word Warning.

Personal Protective Equipment

Appropriate personal protective equipment should be used when handling Transocean PU Thinner 6.04.

Recommended precautions include:

• Use suitable protective gloves
• Wear tightly sealed safety goggles
• Use suitable respiratory protection where ventilation is insufficient or exposure is prolonged
• Avoid contact with skin and eyes
• Wash hands before breaks and after work

Contaminated clothing should be removed promptly.

Accidental Release Measures

In the event of accidental release:

• Keep unprotected persons away
• Wear appropriate protective equipment
• Prevent the product from entering sewers, surface water or groundwater
• Absorb spilled material using suitable liquid-binding materials
• Ensure adequate ventilation
• Dispose of contaminated material according to applicable regulations

Do not flush the product with water or aqueous cleaning agents.

Fire and Explosion Precautions

Because Transocean PU Thinner 6.04 is flammable, it must be kept away from:

• Heat
• Hot surfaces
• Sparks
• Open flames
• Other ignition sources

Smoking should not be permitted in areas where the product is handled or stored.

Suitable precautions should also be taken to prevent electrostatic discharge.

Transport Information

Transocean PU Thinner 6.04 is classified for transport under:

UN Number: UN1993

UN Proper Shipping Name: Flammable Liquid, N.O.S.

Transport Class: 3 – Flammable Liquids

Packing Group: III

The Safety Data Sheet states that the product is not classified as a marine pollutant.

Disposal Considerations

Transocean PU Thinner 6.04 should not be disposed of together with household waste.

The product must not be allowed to enter sewage systems or waterways.

Product residues and uncleaned packaging should be disposed of in accordance with applicable local and official regulations.

Important Safety Note

Always read and follow the official Safety Data Sheet (SDS) before handling, storing, transporting or using Transocean PU Thinner 6.04.

Use only with appropriate ventilation and personal protective equipment, and keep the product away from heat, sparks, flames and other ignition sources.